Advertisement
SASE Company Inc. Equipment Safety Policy Statement
SASE Company, Inc. is adamant that safety is one of the highest priorities for both our employees
and customers. When considering set-up and operation of any piece of equipment supplied,
manufactured, distributed, rented or serviced by SASE Company, Inc., the safety and protection of
people should always be a top priority.
All customers and employees should follow all OSHA and local safety standards, requirements and
regulations.
The use of the following safety equipments are both recommended and required when operating any
piece of equipment supplied, manufactured, distributed, rented or serviced by SASE Company, Inc.
OSHA approved/certified eye protection (safety glasses).
OSHA approved/certified hearing and ear protection.
OSHA approved/certified foot protection (steel toed boots).
OSHA approved/certified respirator or breathing device.
OSHA approved head protection (hard hat).
Proper protective work gloves.
Proper protective clothing limiting skin exposure.
(The list is not meant to be all inclusive. Please exercise sound judgments during operation.)
The work area must always have proper ventilation to minimize the health and safety risks of
propane and gasoline emissions and airborne dust.
All SASE Company Equipment is engineered, designed and provided with dust control shrouds and
vacuum ports. It is strongly recommended that an approved dust containment system be connected
to and used in conjunction with all SASE Company equipment during operational use. SASE
Company supplies, distributes, rents and services dust control systems with HEPA filtration.
Extreme caution must be exercised at all times when electrical power is considered. All SASE
employees are prohibited from working on or hard wiring our equipments to any power
source that has not been provided by SASE Company Inc. Any such work must be
performed by a certified electrical technician. No SASE employee is permitted or authorized
to work on, operate, or connect our equipment or equipment belonging to our customers to
an electrical source that does not meet OSHA approved specifications. There are no
exceptions to this policy! SASE Company, Inc. also strongly recommends that only certified
electricians be permitted to deal with or manipulate electrical power sources within our
customers' facilities or on their job-sites.
Finally, we at SASE Company, Inc. cannot stress enough the importance of following general safety
practices, the utilization of appropriate safety equipment and the application of common sense when
operating equipment supplied, manufactured, distributed, rented or serviced by SASE Company, Inc.
both on the job-site and in the field.
(JJL 07/2010)
Advertisement
