WPI UltraMicroPump II Instruction Manual page 14

Grouped/Non-grouped/Disabled
For convenience in operating multiple pumps (whether of identical or various vol-
umes), pumps may be grouped or non-grouped. Pressing the
cursor is in this field will toggle through three operating modes:
Saving your settings
Pressing the
future use.
World Precision instruments
Grouped mode: syringe channels with "G" in this field are started or
stopped when the /
run stop
grouped channel.
Non-grouped mode: When the cursor is positioned on a channel that is
not grouped, indicated by the letter "n", only that channel will start or stop
when the / key is pressed.
run stop
Disabled mode: When a channel is disabled, the line of data is hidden and
the pump will not operate. no changes may be made to this channel while
it is disabled. to re-enable it, move the cursor back to the Group/nongroup
field and press the
select
button will store these values into the controller's memory for
UltraMicroPump II
key is pressed while the cursor is located on any
key; the previously entered data will be restored.
key while the
select
G = Grouped
N = Non-grouped
D = Disabled
(blank)
12