8.2
Cleaning of Air Filter
Remove air filter.
Clean air filter, using compressed air, blowing from inside outwards.
Special filters are to be cleaned according to the aircraft manufacturer's instructions.
8.3
Adjust Idling Speed
The idling speed may be adjusted via the adjusting screw on the throttle body. The speed
should be adjusted to 800 ±100 rpm. Turning the screw clockwise increases idling speed.
Turning the screw counterclockwise reduces the idling speed.
8.4
Fuel Filter Cleaning
Draining and cleaning of fuel filter.
Refer to flight and maintenance manual of aircraft manufacturer.
8.5
Fuel, Lubrication and Cooling System Check
Check all hoses, hose connections, fittings, related equipment and engine casing joints for
leaks, damage, proper attachment, installation and replacement periods. Check liquid levels.
Coolant and oil level should be between MIN and MAX markings.
Check the radiator, oil cooler and intercooler for obstruction, foreign objects and dirt.
Clean if neccessary.
8.6
Crankcase Ventilation Check
Check visually for damages and clean breather line as necessary. Check suitability and
installation of breather line - it has to be stable at engine operating temperatures (danger
of buckling) and must be installed properly (no bucklings, no reduction in cross-sectional
area, no suction effects at the end of the line).
Edition: 20.06.2018
Operating Manual
L 2400 EF/DF/ET/DT/DX/DS
Page: 33/53