ION FireFly Quick Reference Manual page 9

3. Place FSU-2E and VectorSeis sensor.
• Using NavTool, determine the proper location for the VectorSeis sensor.
• Auger a hole for the VectorSeis sensor and place the sensor securely in the hole.
• Using NavTool, perform these steps:
a. Select the battery type that you have connected to the FSU-2E.
b. Select the sensor orientation.
4. Take alignment readings.
• Keeping the NavTool attached to the Alignment pole, place the Alignment pole over the VectorSeis sensor to get a reading.
Figure 1-4. NavTool on Alignment Pole
• Using NavTool, perform these steps:
FireFly Field Operations Quick Reference Guide 9