Advertisement
Leica mojo3D Direct Section Control – Amazone Amatron+
4
mojo3D
configuration
System Configuration
1. On the main navigation screen, tap the settings button.
2. On the flyout menu, tap the Implement Setup button.
3. Tap
until the Section Controller
Section Controller - - - - Implement
Section Controller
Section Controller
4. Tap Amazone Amatron+, to select it as the section controller.
5. Tap Sprayer Mode, to select it as the implement mode; then tap
6. Tap mojo3D and Touch to configure the mojo3D turn on/off by touching the screen.
7. Tap
to continue to the Section Control Setup
8. Enter the number of sections that are going to be used. If you are not sure, check
how many sections the Amatron+ is configured to use which is displayed on the main
spraying screen or in the sprayer setup screen, see the next section (Controller
Configuration) for more details.
Implement M M M M ode
Implement
Implement
Section Control Setup screen.
Section Control Setup
Section Control Setup
ode screen is displayed.
ode
ode
to continue.
6
Advertisement
