Advertisement
7
Troubleshooting
Leica mojo3D Direct Section Control –Amazone Amatron+
General Troubleshooting
Problem
Problem
Problem
Problem
The sprayer does not spray when treatment is
enabled on the mojo3D.
One or more sections are not automatically
controlled.
Solution
Solution
Solution
Solution
Both the Amatron+ and mojo3D must be
enabled for auto section spraying to
occur. Press the spray button on the main
screen of the mojo3D and the Amatron+
to enable spray. The Amatron+ remains
the master for enabling the sprayer. The
mojo3D will then enable sections as
required and can be used to force
sections on and off.
Check that the spray boom is unlocked.
The Amatron+ does not permit auto
section spraying while the boom is locked.
Check the section override is not active by
using the left and right arrows on the
Amatron+ to select a section then use the
return button (↵ ) to toggle the section
on and off.
11
Advertisement
