Table of Contents
Advertisement
PROBLEM
Too much ice forming in freezer:
Front of cabinet hot to the touch:
Doors out of alignment:
IF THE PROBLEMS WITH THE PRODUCT YOU HAVE PURCHASED ARE NOT AMONGST THOSE
DESCRIBED ABOVE AND IF YOU NEED MORE INFORMATION, PLEASE CONTACT THE AUTHORISED
AFTER-SALES SERVICE. YOU WILL FIND THE ADDRESS AND TELEPHONE IN YOUR LOCAL TELEPHONE
DIRECTOR UNDER SMEG.
TO SPEED UP THE SERVICE, PLEASE BE READY TO INFORM OUR CALL SERVICE OPERATORS OF THE
MODEL OF THE PRODUCT YOU HAVE PURCHASED AND THE SERIAL NUMBER MARKED ON THE
NAMEPLATE INSIDE THE BODY OF THE REFRIGERATOR. THANK YOU IN ADVANCE FOR YOUR
ASSISTANCE.
30
Instructions for the User
POSSIBLE CAUSE
-
inside
thermostat set on too low a
temperature.
AFTER-SALES SERVICE - READING THE NAMEPLATE.
temperature
setting
PROBABLE SOLUTION
-
Use the regulator to set a lower
cooling temperature to increase
the
temperature
appliance slightly;
-
check
that
the
providing an airtight seal: if they
are cracked, try to soften the
gasket by pulling it with one hand
and sliding your closed fingers
along the inside;
-
open the door less often and for
shorter times;
-
rise in atmospheric temperature
and humidity;
-
do not place hot food or drinks
inside the freezer.
-
the
refrigerator
normally. Inside the cabinet there
is
a
surface
cooling
designed to restrict the formation
of condensation in the area where
the door gasket closes.
-
check that the refrigerator is
levelled properly, by also adjusting
the two rear feet if necessary.
Check
whether
changing
settings of the two feet improves
the alignment.
inside
the
gaskets
are
is
operating
system
the
Hide quick links:
Advertisement
Table of Contents
