Install The Optional Retaining Clip For Dx1 And Dx2; Connect The Dx4; How To Charge Devices And Batteries; Charge Batteries - Honeywell FlexDock DX1 User Manual

Install the Optional Retaining Clip for DX1 and DX2

For the DX1 and DX2, you can use the optional retaining clip to secure the power
supply cord to the dock.

Connect the DX4

To power
supply

How to Charge Devices and Batteries

Charge Batteries

1. Place the end of the battery into the battery cup.
2. Press the top of the battery under the tab on top of the cup. The Charge LED for
FlexDock User Guide
To Ethernet
To Ethernet
devices
network
(Ethernet
(Ethernet
docks only)
docks only)
that cup flashes slowly or stays on, indicating the current charge status.
Batteries are fully charged in 6 hours or less.
5