Advertisement
User manual
Dear User
Congratulations on your purchase of a Faber fire! A
quality product from which you will experience
warmth and atmosphere for many years. We
recommend that you read this manual carefully
before using the fire. In the event a failure occurs
despite careful final checks, you can contact your
dealer or
www.faber-fires.eu
For any warranty claims, it is essential you first
register your fire.
Details about your fire can be found on page 1 of
this user manual or in the App. (See 8.1).
You can register your fire at:
www.faber-fires.eu
Check
Check the fire for transport damage and
immediately report any damage to your supplier.
Introduction
Installation and maintenance of the fire must be
carried out by a professional expert who has
proven knowledge and demonstrable competence.
A professional craftsman takes into account all
technical aspects such as heat delivery, gas
connection as well as flue gas discharge
requirements.
Where the installation instructions are not clear,
the national / local regulations must be followed.
Safety instructions for the user
Please note:
It is recommended to always place a protective
grille in front of the fire when children, elderly or
disabled persons are present in the same room. If
vulnerable persons may often be present in the
room without supervision, a fixed screen should
be mounted around the fire.
As a fire is a source of heat, hot air
circulation is created. It is therefore
important that the fire is not stoked too
soon after a renovation. As a result of
natural air circulation, moisture and not
yet cured volatile components from paint,
building materials and carpeted floors and
the like are included in this air circulation.
These parts can settle as soot on cold
surfaces. The moment you can begin using
the fire for the first time depends on
various circumstances. Consult your
installer/dealer about this matter.
3 <
<
<
<
at all times.
The device is designed for atmosphere
and heating purposes. This means that all
visible surfaces, including the glass, may
become hotter than 100°C.
Do not use the remote control and/or App
outside the room where the fire is
situated. Be sure that you are always
aware of the situation around the fire
when it is operated.
The fire cannot be used when: the glass is
damaged or removed or when the
combustion chamber is open.
Do not place flammable materials in the
combustion chamber.
Never change the arrangement of the log
kit and do not add more decoration
material than included with the fire.
Do not place any curtains, clothes,
furniture or other combustible materials
in the vicinity of the device. The minimum
distance is 1 meter.
Do not allow children to use the remote
control without supervision.
Using the fire for the first time
Take care of extra ventilation and open all the
windows in the room during the first
commissioning of the fire. Stoke the fire for some
hours at the highest setting, so that the paint gets
the chance to harden and any escaping vapours
are disposed of safely. Keep vulnerable people and
pets outside the room during this process!
Cleaning and maintenance
The device must be cleaned and checked annually
for proper operation by an installer.
The outside of the fire can be cleaned with a clean
damp cloth.
Cleaning of the glass
Remove the glass as described in the installation
instructions.
The glass can be cleaned with Faber glass cleaner.
This is a specially formulated cleaning agent that
can be ordered at authorised Faber dealers. Never
use aggressive cleaning agents or abrasive
products.
Please note:
Avoid fingerprints on the glass. These may be
retained by the heat and may then no longer be
removable.
Advertisement
