Button Service Access Options - Caroma Invisi Series II Manual

Direct Panel Mounting - Front
This is suitable for use with any of the
button panel kits.
Requires a 0.2" (5mm) minimum -
1.8" (45mm) maximum wall thickness.
Access to the tank internals is
provided through the panel window.
Remote Panel Mounting
This is suitable for use with any of the
button panel kits.
Requires a 0.2" (5mm) minimum -
1.8" (45mm) maximum wall thickness.
A Blank Access Panel is required for
inwall access to tank internals.
5
Direct Panel Mounting - Top
This is suitable for use with any of the
button panel kits.
Requires a 0.2"(5mm) minimum -
1.8" (45mm) maximum wall thickness.
Access to the tank internals is
provided through the panel window.
Remote Button Mounting
Access to the rear of the buttons must
be provided for servicing.
Suitable for mounting through panels
up to 2.2" (55mm) thick.
A Blank Access Panel is required for
inwall access to tank internals.
INVISI

Button Service Access Options

Care Button Panel
A Care Button Panel is available for
use in ADA applications.
™
SERIES II