Junction Box Circuit Board Replacement; Removal - Graco RoadLazer RoadPak Repair Manual
Line striping system for the application of road marking and reflective coatings for professional use only
Hide thumbs
Also See for RoadLazer RoadPak:
- Installation & operation manual (34 pages) ,
- Manual (28 pages)
Table of Contents
Advertisement
Junction Box Circuit Board Replacement
Junction Box Circuit Board Replacement
Removal
1. Disconnect ground terminal of battery and then discon-
nect positive terminal of battery.
2. Remove red and black wires from battery area.
3. Unplug control cable and gun arm cable from junction
box (179).
4. Disconnect pump counter wires.
30
5. Disconnect white and yellow wires behind engine muf-
fler.
6. Remove four screws (38), two screws, and bushing
(37) from junction box (179).
7. Remove circuit board (178) from junction box (179).
3A5385A
Hide quick links:
Advertisement
Table of Contents
