Compressor Belt And Hydraulic Pump Belt; Belt Removal - Graco RoadLazer RoadPak Repair Manual
Line striping system for the application of road marking and reflective coatings for professional use only
Hide thumbs
Also See for RoadLazer RoadPak:
- Installation & operation manual (34 pages) ,
- Manual (28 pages)
Table of Contents
Advertisement
Compressor Belt and Hydraulic Pump Belt
Belt Removal
NOTE: In order to remove the compressor belt, the
hydraulic pump belt must first be removed.
1. Perform Pressure Relief Procedure, page 8.
2. Remove air line (145) from compressor.
3. Loosen four mounting bolts on compressor to
reduce compressor belt tension.
3A5385A
Compressor Belt and Hydraulic Pump Belt
4. Remove six screws (1) and two nuts (15) from top
belt guard (108).
5. Remove top belt guard (108).
11
Hide quick links:
Advertisement
Table of Contents
