Graco RoadLazer RoadPak Repair Manual page 15

4. Visually inspect to make sure belts and pulleys will
be properly aligned when engine is tightened.
3A5385A
Compressor Belt and Hydraulic Pump Belt
5. Tighten four nuts (5) and bolts (3) to secure engine
in place. Visually inspect and make sure hydraulic
belt is properly aligned. Repeat until proper align-
ment is achieved.
6. Tighten four nuts (5) and bolts (12) so compressor
is level. Before completely tightening bolts, tension
compressor belt (102) by shifting compressor to the
right.
15