GE GLE12HSLSS Owner's Manual & Installation Instructions page 18

Accessory Installation Instructions
GEAppliances.com.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
local inspector's use.
IMPORTANT –
•
and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level
basic mechanical skills.
• Completion time – 20–60 minutes
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
Damage – Shipment/Installation
to the store in which it was bought for repair or
replacement.
replacement is the responsibility of the customer.
the customer), repair or replacement must be made
by arrangement between customer and installer.
1.800.GE.CARES or visit our Website at:
1.800.561.3344 or visit our Website at: geappliances.ca
Save these instructions for
Observe all governing codes
Be sure to leave these
ITEMS NEEDED FROM IM4D KIT
1
2
3
Water Valve and
Tube Assembly
5 Hex-Head Screw
6
Water Line Clamp
(strain relief), for
house water line
ICEMAKER
WARRANTY VERIFICATION
Date Installed
Dealer
Warranty Label
7
8
10 Phillips Head Screws,
for mounting icemaker (2)
13
(side-mounted)
16
Bracket Extension
Hex-Head Screws, for
17
bracket extension (1)
49-60769 Rev. 3