Advertisement
1.
C
8002R
ONNECTING THE
PIN P
PC/T
AD TO A
The 8002R device can be used to connect with PC/
terminal. It supports RJ12 offset, USB interfaces via
different cable types such as RJ12 offset and standard
USB via mini din type connector.
Input voltage/current: 5V/400mA(USB) or
12V/200mA(RJ12 offset)
Operating Temperature: 0 ~50
℃
℃
Note: Turn off or unplug the PC/terminal whenever
you connect or disconnect the PIN Pad. Be sure the
PC/terminal is not processing data when powered off.
2.
8002R PIN P
D
AD
EVICE
S
ETUP
The 8002R device displays the message READY FOR
SALE. This ready message indicates the device is ready
for use.
3.
C
R
ONTACTLESS
EADER
Aim the center position of the card to the contactless
logo, and watch the LEDs for read status. A green light
represents a good read.
ERMINAL
Figure 1
USB
Figure 2
RJ12 offset
Figure 3
Figure 4
Figure 5
4
. M
S
R
AGNETIC
TRIPE
Find the card reader slot on top of PIN Pad.
User can swipe magnetic card in both direction, left to
right or opposite. (Figure 6)
5.
U
PIN P
SING THE
AD
To complete a transaction, the PIN pad device displays
the following prompt, ENTER PIN. Key in your PIN
and press [ENTER]. The device returns to the ready
message after it successfully receives the PIN entry.
Note: If the PIN is entered incorrectly, press [CANCEL]
and re-enter it.
6.
C
LEANING
Periodically clean the PIN Pad device with a clean cloth
dampened with water and a mild soap or cleaner. Do
not use harsh chemicals.
7.
M
AINTENANCE
Stringent quality-control standards are followed in
manufacturing all PIN Pad devices. Numerous tests are
performed on each unit before leaving the factory to
ensure quality and reliability.
EADER
Figure 6
Advertisement
