Advertisement
Product Walk Through
Step 1
The Receiver has just been turned on. It is in MONITOR mode. Columns 1, 2, 4 and 6
were previously programmed to Sensors.
Step 2
A Signal from the Sensor associated with column 2 has just been received indicating
that Sensor #2 is in range and communicating with the Receiver.
Step 3
A Signal from the Sensor associated with column 1 has just been received indicating
that Sensor #1 is in range and communicating with the Receiver.
1
2
3
1
2
3
1
2
3
4
5
6
4
5
6
4
5
6
4
Sensors 1-6
6
Advertisement
