Advertisement
Step 11
The user has pressed the MODE button once and has entered the ERASE mode. The
countdown timer became active and has counted down 2 seconds. If the user does
nothing, then in 3 seconds all programming will be erased. Press the MODE button
once to prevent programming being erased and return to MONITER mode as shown
in Step 12.
Step 12
The user has pressed the MODE button once before the countdown timer expired
and is back in MONITOR mode. The user has moved through all modes and is back
at the starting point.
1
2
3
1
2
3
4
5
6
4
5
6
10
Advertisement
