Advertisement
Step 7
Pressing the MODE button once will take the user from MONITOR mode to the OFF
mode. A 5 second countdown timer will begin and the Receiver will turn off when it
reaches 0. The user can exit the OFF mode before the timer reaches 0 by pressing
the MODE button once, this will take the user to Program mode with the Select icon
appearing in column 1.
Step 8
To program a Sensor to column 3 press the MODE button 2 times, to move the Select
icon
to column 3. The Select icon
programmed. Now perform the following programming steps:
1. Bring the Receiver within 6 inches of the Sensor you want associated
with column 3.
2. Initiate a motion message by waving your hand in front of the Sensor.
1
2
3
1
2
3
4
5
6
4
5
6
indicates that column 3 is ready to be
8
Advertisement
