Advertisement
Step 4
A Signal from the Sensor associated with column 4 has just been received indicating
that Sensor #4 is in range and communicating with the Receiver.
Step 5
A minute has elapsed since the Receiver was turned on. No Signal icon
column 6 indicates Sensor #6 is either out of communication range, the batteries are
dead or the Sensor is not working.
Step 6
A motion message from Sensor #2 has just been received indicating a target has
passed through the Detection Zone. The ALARM icon
onds. At this time the motor will vibrate three times, the LCD backlight will flash three
times and the buzzer will beep three times (if it is turned on).
7
1
2
3
1
2
3
1
2
3
4
5
6
4
5
6
4
5
6
will remain on for 5 sec-
in
Advertisement
