Page 1
OPAL VAPHMT & VAPHET PANEL HEATER RANGE Installation and wiring instructions 230-240V AC ~ 50 Hz Please read all the instructions carefully in conjunction with the illustrations before starting the installation. PLEASE SAVE THESE INSTRUCTIONS...
Page 2
The product you have just purchased has undergone numerous tests and inspections to guarantee the highest quality. Thank you for your choice and your confi dence in us. We hope it will give you entire satisfaction. Some recommendations Please read the documentation before starting to install the panel heater. Disconnect power before working on the panel heater.
Page 3
2) How to install the panel heater 2.1 Mount the wall support - Place the attachment lug on the fl oor - Mark the holes, to determine the position of the lower attachments. - Raise the attachment lug, making the previously marked holes coincide so that you can locate the remaining two holes - Drill holes and put the inserts into place - Fix the support.
2. USING THE PANEL HEATER 1) Description of the control unit : /I Switch (0/I) Temperature adjustment control knob. Heating indicator light 2) Fixing the comfort temperature : a) Put the switch to (marche/ I). b) Mechanical : set the control knob to between 4 and 5.
5) The heating indicator: V1 (electronic model) This light comes on when the heating element is working. It may fl ash when the temperature has stabilised. 6) Locking the controls : It is possible to look or limit use of the control knob and look the switch to prevent unauthorized manipulation of the panel heater (children, etc,..)
WARNINGS This device is not intended for use by young persons(incliding children) with physical sensory or mental disability, or by persons locking experience or know- ledge, unless they have received from a person in charge of their safety adequate supervision or preliminary instructions on how to use the device. Care must be taken at all times to keep children from paying with the device.
Page 7
United Kingdom contact your local supplier. Vent-Axia guarantees this product for two years from the date of purchase against faulty material or workmanship. In the event of any part being found to be defective, the product will be repaired, or at the Company’s discretion the product will be replaced without charge, provided that the product:...