iTero Element 5D Configuration Operation Manual page 6

Symbols
The following symbols may appear on iTero Element 5D hardware
components, and may also appear within this document and other
iTero Element 5D literature.
Wherever this symbol appears on the device, it
is recommended to refer to this document for
information on proper usage of the device.
Applied part type BF. Any component on which
this symbol appears is electric isolation type BF.
Separate collection of electrical waste and
electronic equipment is required.
Attention: This symbol is used to highlight the fact
that there are specific warnings or precautions
associated with the device. Wherever this symbol
appears on the device, it is mandatory to refer to
safety-related information within this document.
Parts or accessories on which this symbol occurs
should not be reused.
CAUTION: US Federal Law restricts this device
to sale by or on the order of a licensed Dentist,
Orthodontist or Dental Professional. The system
"Rx only"
serves as a prescription medical device and
should be operated by qualified health-care
providers only.
Medical device manufacturer.
REF
Order number.
SN
Serial number.
Indicates the Authorized representative in the
European Community.
IEC 60417-5032: Alternating current.
iv
iTero Element 5D operation manual
Indicates a medical device that needs to be
protected from moisture.
Indicates the temperature limits to which the
medical device can be safely exposed.
Indicates the need for the user to consult the
instructions for use.
MLot
Manufacturer's batch code.
Indicates the range of atmospheric pressure to
which the medical device can be safely exposed.
Indicates the range of humidity to which the
medical device can be safely exposed.
Fragile, handle with care.
This side should be up.
IEC 60417-5031: Direct current.
Wand (scanning unit).
USB socket.
Electric battery.
RoHS (China).
IEC 60417-5009: STAND-BY.
English