iTero Element 5D Instructions For Use Manual page 3

iTero Element 5D instructions for use
Copyright
Copyright © by Align Technology, Inc. 2018. All rights reserved. The
information contained in this manual is subject to change without notice.
The hardware and software described in this manual are supplied under
a Sales and Services Agreement and may be used only in accordance
with the terms of that agreement.
No part of this document may be reproduced, photocopied, stored in a
retrieval system, or transmitted in any manner (electronic or mechanical)
for any purpose other than the customer's normal usage, without the
prior written permission of Align Technology Inc.
This document describes the iTero
Device. English language version. Updated in November 2018.
USA office
Corporate Headquarters
Align Technology, Inc.
2820 Orchard Parkway
San Jose, California 95134
www.aligntech.com
Tel: +1 (408) 470-1000
Fax: +1 (408) 470-1010
Customer support
Tel: +1 (800) 577-8767
E-mail:
iterosupport@aligntech.com
E-mail:
orthocadsupport@aligntech.com
206721RevC_iTeroElement5D_IFU.indd 1
English
Element 5D Optical Impression
®
Align Technology Ltd.
3 Ariel Sharon Boulevard
Or-Yehuda 6037606
Israel
Tel: +972 (3) 634-1441
Fax: +972 (3) 634-1440
Obelis s.a.
Boulevard Général Wahis 53
B - 1030 Brussels, Belgium
www.obelis.net
Tel: +32.2.732.59.54
Fax: +322.732.60.03
E-mail: zmail@obelis.net
Trademarks
The following are trademarks and/or service marks of Align Technology,
Inc. or one of its subsidiaries or affiliated companies and may be
registered in the U.S. and/or other countries:
Align Technology Inc., iTero
®
Any other trademarks or registered trademarks appearing in this
document are the property of their respective owners.
Netherlands office
International Headquarters
Align Technology B.V.
Arlandaweg 161
1043 HS Amsterdam
Tel: +31 (0) 20-586-3600
Fax: +31 (0) 20-586-3751
i
1/9/19 3:12 PM