Using The Ir Learning Function - Polk Mono Command Bar Quick Start Manual

Using the IR Learning Function

IMPORTANT: Hold both remotes about 12" (30cm) directly
d b
12" (30cm)
in front of the Command Bar when pressing their respective
buttons. Make sure your remotes have fresh batteries.
Entering IR Learn Mode
Make sure your sound bar is powered on, then press and hold the mic mute button on the sound bar
for about 3 seconds. Release the button when you hear "Entering IR learn mode." You should now see a
slow blinking white light on the front of the sound bar.
STEP 1: Select a button on your Command Bar remote
Press and release the button on the Command Bar remote that you want to learn (ex: Volume Up).
STEP 2: Select a button on your TV remote
Very slowly tap the corresponding button on your TV remote until you hear "IR Command learned."
STEP 3: Learn another code
Continue learning additional functions by repeating steps 1-3.
Exiting IR Learn Mode
Press and hold the mic mute button on the sound bar again for about 3 seconds.
NOTE: The sound bar will automatically exit IR learn mode if it has not received any IR commands for 60 seconds.
All learned IR commands will automatically be saved.
15