Do you have a question about the DBRX1 and is the answer not in the manual?
Questions and answers
Charles M. Patin
April 29, 2025
I recently purchased a Polk DBRX1 SB with wireless Sub Wolfer and Surround speakers. Why are the commercials SO much louder than the TV programs, My hopper has been set to voice equalization. I had been using a Sony soundbar with my Sony XBR55X800H TV and never experienced this problem.
1 comments:
Mr. Anderson
May 15, 2025
Commercials may seem louder than TV programs when using the Polk DBRX1 soundbar with a Sony XBR55X800H TV because the soundbar amplifies all audio signals equally. Commercials are often produced with higher average volume levels than regular programming. The Polk DBRX1 does not automatically level volume differences between content types. However, using features like Polk VoiceAdjust or Night Mode may help make dialogue clearer and reduce sudden volume changes.
This answer is automatically generated
Charles M. Patin
April 29, 2025
Is DBRX1 with wireless Wolfer and Surround speakers a 2 or 3 channel system??
1 comments:
Mr. Anderson
May 15, 2025
The Polk DBRX1 with wireless woofer and surround speakers is not a 2-channel or 3-channel system; it supports Dolby Digital 5.1, which indicates it is a 5.1-channel system.
Page 1
CINEMA SOUND BAR DBRX1 Quick Start Guide...
Page 2
Polk Audio is a DEI Holdings, Inc. company. Polk Audio and Polk are registered trademarks of Polk Audio, LLC. All other trademarks, product names, logos, and brands referenced herein are the property of their respective owners. RMN: DBRX1 SOUND BAR...
Page 3
What’s in the Box Polk DBRX1 sound bar Optical cable Power cord Remote control Wall mount template Documentation AAA batteries (2)
Page 4
Position your sound bar Place the sound bar centered under the TV and flush with the front edge of the cabinet. It is best if you do not install the sound bar inside of a cabinet.
Page 5
Connect the TV HDMI ARC (Recommended) Optical Insert one end of the HDMI cable* into the Insert one end of the optical cable into the HDMI ARC port on the sound bar. OPTICAL port on the sound bar. Insert the other end of the HDMI cable* into Insert the other end of the cable into the the HDMI port labeled “HDMI ARC”...
Connect the power Connect the power cord to the POWER port on the back of the sound bar. Connect the other end of the power cord into an AC power outlet. WIRELESS ADAPTER AC INPUT 65W 100–240V - 50/60Hz SURROUND HDMI ARC OPTICAL CONNECT...
Page 7
set up the remote Turn the remote to view the back. Open the back cover of the remote by sliding the bottom half downward. Insert the two AAA batteries into the remote and replace the cover.
Page 8
verify the connections Turn on the TV. Turn on the satellite receiver or other video source. Make sure the sound bar is powered on (green status light on front). Select the satellite receiver input on the TV. Verify that you hear sound from the sound bar by adjusting the volume using the sound bar remote.
remote control features Power Analog input TV input Bluetooth input Volume up/down Mute Night mode Voice adjust on/off on/off Surround Bass up/down speaker level adjustment up/down...
Page 10
The Polk DBRX1 has been designed to automatically optimize sound for TV, movies, and music. Polk engineers have also created Voice Adjust® and Night Mode to further enhance your listening experience and provide a way to further customize your television sound.
top panel controls Analog Power Voice Volume input Adjust – ANALOG VOICE TV input Bluetooth Volume input down Power: Turns the sound bar on/off. TV input: Selects the TV input connection (HDMI or optical) Analog input: Selects the analog input connection. Bluetooth input: Selects the Bluetooth input.
Page 12
Back panel ports WIRELESS ADAPTER AC INPUT 65W 100–240V - 50/60Hz SURROUND HDMI ARC OPTICAL CONNECT ANALOG UPDATE POWER Wireless adapter port: Accepts the wireless adapter for the optional wireless subwoofer and surround speakers. Connect button: Used to pair the optional wireless subwoofer and surround speakers to the sound bar.
Status lights The status of the sound bar is provided by an array of seven multicolored LEDs located on the top front of the sound bar. Status lights Function Light Pattern Power On Power Off Volume Min Volume Max TV Input (Dolby Digital) TV Input (PCM) Analog Input Bluetooth...
Page 14
Listening to music using bluetooth To pair your mobile device using Bluetooth, press the Bluetooth button on the sound bar or remote control. The blue status light located in front of the Bluetooth button will slowly pulse as the sound bar enters pairing mode and waits to connect to your Bluetooth device.
controlling the sound bar using your dish remote HDMI connection Optical connection If you connected to the TV using the HDMI cable, If you connected to the TV using the optical make sure HDMI CEC is enabled in the TV menus. cable, simply program your Dish remote to Here is a list of the common names for HDMI- control your TV, and the Dish remote will...
Page 16
using the remote control learning function 12” (30 cm) If your TV is connected to the sound bar using the optical cable and you are not able to control the volume of the sound bar with your TV or Dish remote, you can use the Remote Control Learning function to control volume and mute on your sound bar.
Page 17
4. Learn another code. When you see the white lights on the front of the sound bar bouncing left and right again, you are ready to select your next function to learn by repeating steps 1–3. Exiting remote control learning Mode Press and hold the ANALOG button on the sound bar again for about 5 seconds.
Tips and troubleshooting I don’t have an HDMI port labeled “ARC” on my TV. • Connect an optical audio cable between the TV and sound bar. • Refer to your TV’s manual for instructions on how to turn off the TV’s internal speakers. I don’t hear any sound.
Page 20
¡Gracias por su compra de la barra de sonido de Polk®! Si tiene preguntas o comentarios, llámenos o envíenos un correo electrónico. Asistencia técnica www.polkaudio.com Visite nuestra página de ayuda y preguntas frecuentes en https://polk.custhelp.com para mayor asistencia. Llame a Servicio al cliente de Polk al 800-377-POLK(7655) Polk Audio es una empresa de DEI Holdings, Inc.
Page 21
Lo que contiene la caja Barra de sonido Polk DBRX1 Cable óptico Cable de alimentación Control remoto Plantilla para montaje en pared Documentación Baterías AAA (2)
Page 22
Coloque su barra de sonido Coloque la barra de sonido centrada debajo de la TV y al ras con el borde frontal del gabinete. Es preferible que no instale la barra de sonido dentro del gabinete.
Page 23
Conecte la TV HDMI ARC (recomendado) ÓPTICO Inserte un extremo del cable HDMI* en el Inserte un extremo del cable óptico en el puerto HDMI ARC en la barra de sonido. puerto ÓPTICO en la barra de sonido. Inserte el otro extremo del cable HDMI* en el Inserte el otro extremo del cable en el puerto HDMI marcado “HDMI ARC”...
Page 24
Conecte el cable de alimentación Conecte el cable de alimentación al puerto POWER en la parte trasera de la barra de sonido. Conecte el otro extremo del cable de alimentación en el tomacorrientes de CA. WIRELESS ADAPTER AC INPUT 65W 100–240V - 50/60Hz SURROUND HDMI ARC...
Page 25
CONFIGURAR EL CONTROL REMOTO Dé vuelta al control remoto para ver la parte trasera. Abra la cubierta del control remoto deslizando la parte inferior hacia abajo. Inserte dos baterías AAA en el control remoto y coloque la cubierta de las baterías nuevamente.
VERIFICAR LAS CONEXIONES Encienda la TV. Encienda el receptor satelital u otra fuente de video. Verifique que la barra de sonido esté encendida (luz de estado verde al frente). Seleccione la entrada del receptor satelital en la TV. Utilice el control remoto de la barra de sonido para ajustar el volumen y verifique que se emita sonido de la barra de sonido.
FUNCIONES DEL CONTROL REMOTO Encendido/apagado Entrada análoga Entrada de televisión Entrada de Bluetooth Volumen hacia arriba/abajo Silenciar Modo nocturno Ajuste de voz activado/desactivado activado/desactivado Ajuste de nivel sonido Graves hacia arriba/abajo envolvente de las bocinas hacia arriba/abajo...
Page 28
MODOS DE SONIDO El Polk DBRX1 fue diseñado para mejorar el sonido automáticamente para la TV, películas, y música. Los ingenieros de Polk también crearon Voice Adjust® y el Modo nocturno para mejorar aún más su experiencia de sonido y ofrecerle una manera de personalizar aún más el sonido de su televisión.
Page 29
CONTROLES DEL PANEL SUPERIOR Encendido/ Entrada Voice Subir análoga apagado Adjust volumen – ANALOG VOICE Entrada de Entrada de Bajar televisión Bluetooth volumen Encendido/apagado: Enciende/apaga la barra de sonido. Entrada de televisión: Selecciona la conexión de la entrada de la TV (HDMI u Óptico) Entrada análoga: Selecciona la conexión de la entrada análoga.
puertos del panel posterior ADAPTADOR INALÁMBRICO ENTRADA DE CA 65 VATIOS 100–240V - 50/60Hz ENVOLVENTE HDMI ARC ÓPTICO CONECTAR ANÁLOGO ACTUALIZACIÓN ENCENDIDO Puerto para adaptador inalámbrico: Recibe el adaptador inalámbrico para la bocina de graves inalámbrica y las bocinas envolventes opcionales. Botón de conexión: Se utiliza para conectar la bocina de graves y bocinas envolventes opcionales a la barra de sonido.
LUCES DE ESTADO El estado de la barra de sonido se maneja con un conjunto de siete luces LED de varios colores que se ubican en la parte frontal de la barra de sonido. Luces de estado Función Patrón de la luz Encendido Apagado Volumen mínimo...
Page 32
Escuchando música con Bluetooth Para conectar su dispositivo móvil usando Bluetooth, presione el botón Bluetooth en la barra de sonido o control remoto. La luz de estado color azul que se ubica al frente del botón Bluetooth pulsará lentamente ya que la barra de sonido entrará...
CONTROLAR LA BARRA DE SONIDO CON SU CONTROL REMOTO DE DISH CONEXIÓN HDMI Conexión óptica Si está conectado a la TV con el cable HDMI, Si está conectado a la TV con el cable óptico, verifique que haya activado HDMI CEC en los simplemente programe el control remoto de menús de la TV.
Page 34
usando la función de aprendizaje del control remoto 12” (30 cm) Si su televisor está conectado a la barra de sonido mediante el cable óptico y no puede controlar el volumen de la barra de sonido con su televisor o plato remoto, puede usar el control remoto de aprendizaje función para controlar el volumen y silenciar en su barra de sonido.
Page 35
4. Aprender otro código. Cuando vea nuevamente las luces blancas al frente de la barra de sonido que pasan de izquierda a derecha, ya está listo para seleccionar la siguiente función para aprender, repita los pasos 1-3. salir del modo de aprendizaje de control remoto. Presione y sostenga el botón Análogo en la barra de sonido nuevamente durante 5 segundos.
Page 36
CONSEJOS Y RESOLUCIÓN DE PROBLEMAS Mi TV no cuenta con un puerto HDMI marcado “ARC”. • Conecte un cable óptico de audio entre la TV y la barra de sonido. • Consulte el manual de su TV para las instrucciones sobre cómo apagar las bocinas internas de su TV.
Safety Precautions Innovation, Science and Economic Development Canada’s Notices This Class B digital apparatus complies with Canadian ICES-003. To reduce potential radio interference to other users, the antenna type and its gain FCC Statement should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
Page 40
12. Use only with the cart, stand, tripod, bracket, or table specified This equipment is a Class II or double insulated electrical appliance. by the manufacturer, or sold with the apparatus. When a cart is It has been designed in such a way that it does not require a safety used, use caution when moving the cart/apparatus combination connection to electrical earth for sound bar and subwoofer.
Page 41
1-Year Limited Warranty THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER Polk Audio, LLC (“Polk”) warrants to the original retail purchaser that Polk Audio RIGHTS THAT VARY FROM STATE TO STATE. ALL WARRANTIES, INCLUDING BUT NOT branded wireless speakers, will be free from defects in materials and workmanship LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTIES OF MERCHANTABILITY for a period of (1) one year, under normal use and conditions.
Precauciones de seguridad Aviso de la FCC RF Este equipo debe ser instalado y utilizado según las instrucciones suministradas y la antena(s) utilizada por este transmisor debe instalarse proporcionando una Normativa FCC distancia de separación a personas de al menos 20 cm y no debe colocarse o utilizarse conjuntamente con ninguna otra antena o transmisor.
Page 43
dangerous voltage within the product’s enclosure that may be of élevée pour constituer un risque d’électrocution. su cient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended Le point d’exclamation dans un triangle équilatéral indi to alert the user to the presence of important operating and présence d’importantes consignes d’utilisation et d’entr maintenance (servicing) instructions in the literature...
Page 44
ESTA GARANTÍA LE PROPORCIONA DERECHOS LEGALES ESPECÍFICOS, Y ES POSIBLE Garantía limitada de 1 año QUE TENGA OTROS DERECHOS QUE VARÍAN DE UNOS ESTADOS A OTROS. TODAS Polk Audio (“Polk”) garantiza al comprador minorista original que los altavoces LAS GARANTÍAS; INCLUYENDO A TÍTULO ENUNCIATIVO PERO NO LIMITATIVO, inalámbricos de la marca Polk Audio no tendrán defectos en los materiales ni de GARANTÍAS EXPRESAS, GARANTÍAS IMPLÍCITAS DE COMERCIALIZACIÓN E IDONEIDAD mano de obra en un periodo de uno (1) año, en condiciones y usos normales.
Page 49
Date 17 March 2021 File Name Polk_Dish_DBRX1_SoundBar_QSG_ENG_ESP_122320.pdf Scale 168mm x 124mm Drawn By Color Full color Paper Tortilla smooth/80T (98 opacity, 10.6 caliper, 150 smoothness) Offset Artwork Digital file TITLE BLOCK DOES NOT PRINT Revision Date Description 10/08/20 Initial release 10/12/20 Legal updates 12/23/20 Removed inclusion of HDMI, RCA adapter and analog...
Page 50
1008 MM DBRX1 SOUND BAR MOUNTING TEMPLATE / PLANTILLA DE MONTAJE DE BARRA DE SONIDORE LEAVE SPACE BETWEEN THE SOUND BAR AND YOUR TV / MANTENGA EL ESPACIO ENTRE LA BARRA DE SONIDO Y SU TV MARK HERE MARK HERE...
Need help?
Do you have a question about the DBRX1 and is the answer not in the manual?
Questions and answers
I recently purchased a Polk DBRX1 SB with wireless Sub Wolfer and Surround speakers. Why are the commercials SO much louder than the TV programs, My hopper has been set to voice equalization. I had been using a Sony soundbar with my Sony XBR55X800H TV and never experienced this problem.
Commercials may seem louder than TV programs when using the Polk DBRX1 soundbar with a Sony XBR55X800H TV because the soundbar amplifies all audio signals equally. Commercials are often produced with higher average volume levels than regular programming. The Polk DBRX1 does not automatically level volume differences between content types. However, using features like Polk VoiceAdjust or Night Mode may help make dialogue clearer and reduce sudden volume changes.
This answer is automatically generated
Is DBRX1 with wireless Wolfer and Surround speakers a 2 or 3 channel system??
The Polk DBRX1 with wireless woofer and surround speakers is not a 2-channel or 3-channel system; it supports Dolby Digital 5.1, which indicates it is a 5.1-channel system.
This answer is automatically generated