1. Manuals
  2. Brands
  3. TKB Home Manuals
  4. Home Automation
  5. TKBETZ69-CH
  6. Manual

TKB Home TKBETZ69-CH Manual

Smart energy plug in switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TKB Home
Smart energy plug in switch
SKU: TKBETZ69-CH
Quickstart
This is a On/Off Power Switch for Europe. To run this device please connect it to your mains power supply. To add this device to your network
execute the following action:
Press the socket on/off button three times within 1.5 seconds to be included.
What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart
section. (For more information about frequency regulations please refer to
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a
repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
Create PDF in your applications with the Pdfcrowd
the frequency coverage overview at Sigma Designs Website
HTML to PDF API
).
PDFCROWD

Advertisement

Table of Contents
loading

Related Manuals for TKB Home TKBETZ69-CH

Summary of Contents for TKB Home TKBETZ69-CH

  • Page 1 TKB Home Smart energy plug in switch SKU: TKBETZ69-CH Quickstart This is a On/Off Power Switch for Europe. To run this device please connect it to your mains power supply. To add this device to your network execute the following action: Press the socket on/off button three times within 1.5 seconds to be included.

  • Page 2: Product Description

    This device and every other certified Z-Wave device can be used together with any other certified Z- Wave device regardless of brand and origin as long as both are suited for the same frequency range. If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security.

  • Page 3: Product Usage

    Inclusion/Exclusion On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion. Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network.

  • Page 4: Quick Troubleshooting

    Choosing a Suitable Location 1. Do not locate the switch facing direct sinlight, humid or dusty place. 2. The suitable ambient temperature for the switch is 0-40°C 3. Do not locate the switch whre exists combusible substances or any source of heat, e.g. fires, radiators, boiler ect. 4.

  • Page 5: Configuration Parameters

    Z-Wave devices control other Z-Wave devices. The relationship between one device controlling another device is called association. In order to control a different device, the controlling device needs to maintain a list of devices that will receive controlling commands. These lists are called association groups and they are always related to certain events (e.g.

  • Page 6: Technical Data

    Parameter 3: Watt Meter Report Period If the setting configured for 1 hour (set value = 720), the TZ69 will report its instant power consumtion every 1 hour to Z-Wave Controller. The maximum interval to report its instand power consumption is 45 hours. Size: 2 Byte, Default Value: 720 Setting Description...

  • Page 7: Supported Command Classes

    Dimensions 0.0590000x0.0750000x0.1010000 mm Weight 123.43 gr Hardware Platform ZM5202 6959174469455 IP Class IP 20 Voltage 230V Load 2500W Device Type On/Off Power Switch Network Operation Always On Slave Firmware Version HW: 1 FW: 2.00 Z-Wave Version 6.51.06 Certification ID ZC10-16075146 Z-Wave Product Id 0x0118.0x0004.0x0002 Supported Meter Type...

  • Page 8: Explanation Of Z-Wave Specific Terms

    Basic Configuration Device Reset Locally Firmware Update Md V2 Manufacturer Specific V2 Meter V3 Powerlevel Switch Binary Version V2 Zwaveplus Info V2 Explanation of Z-Wave specific terms Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
  • Page 9 (c) 2018 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwave.eu. The template is maintained by Z-Wave Europe GmbH. The product content is maintained by Z-Wave Europe GmbH , Supportteam, support@zwave.eu. Last update of the product data: 2017-12-27 14:25:39 Create PDF in your applications with the Pdfcrowd HTML to PDF API...

Table of Contents