Other Add-In Components; Power Supply - NEC Express5800/R110j-1 System Configuration Manual

SYSTEM CONFIGRATION GUIDE –
SAS
NOTE:

Please refer to the NEC Storage website for supported OS and device

Please refer to the Individual note for supported OS and device, when connect LTO or tape drive connection via Device
Expansion Unit.

For FC-SAN boot, please refer to "FC SAN Boot Configuration Guide"

For the cluster configuration, please refer to the Express Cluster website

Fibre Channel (FC) link speed varies by types and length of cables

Please refer to the device's System Configuration Guide for supported SAS cable.

Other Add-in Components

8

Power Supply

8.1
Category
Non Redundant
Redundant
NOTE:

Minimum one power supply kit(N8181-159) and Power Cage(N8181-180) must be installed.
Available Power Supplies
See the table below for available power supplies based on the number and type of processor, the number and type of Disk and FLOM.
4x2.5-inch Drive Model
Type of Processor
Processor with 71 Watt or less
Processor with 80 Watt or more
2x3.5-inch Drive Model
Type of Processor
Processor with 71 Watt or less
NEC Corporation
NEC Express5800/R110j-1
SAS Controller
LSI SAS9300-8e Host Bus Adapter
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0(x8)
NOTE:
- Please download the driver kit from Express5800 web site.
- Up to one card can be installed.
- This controller is an factory installation option. Select N8103-184 for
the field upgrade use after shipment.
SAS Controller
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0 x8
Product Name / Description
290W Non-hot Plug Power Supply
NOTE:
- This controller is a factory installation option.
- No AC power cord is included.
Power
500W Platinum Hot Plug Power Supply
Unit
1 x 500 Watt 80 PLUS® Platinum, including one 2m IEC320 C14
power cord
Redundant PSU Cage
Power
Up to two N8181-159 500W Platinum Hot Plug Power Supplies
Cage
can be installed.
NOTE:
- This controller is a factory installation option.
Number of
Disk
Up to 4
5 or more
-
FLOM
No
Revision 1.0 – January 2019
Available Power
FLOM
Supply
No
290W, 500W
Yes
500W
- 500W
- 500W
Available Power
Supply
290W, 500W
N8103-E184
N8103-197
Part Number
N8181-179
N8181-159
N8181-180
21