Features; Installation; Connection With The Mains - EuroLite LED FL-300 Flamelight User Manual

Features

Impressive Flame-Light with DMX Control
Unbelievably realistic effect
•
Flame height 150 cm
•
Robust version
•
Two fans
•
Operable in stand-alone mode or via DMX interface
•
DMX512 control possible via any commercial DMX controller (occupies max. 6 channels)
•
3 or 6 DMX channels selectable for various applications
•
• Comfortable addressing and setting via control panel with LED display and four operating buttons
Functions: Color intensity, auto mode, strobe, speed settings, Master/Slave
•
Equipped with 168 x 10 mm LEDs
•
Various deco-possibilities
•
IEC Power cord with safety-plug included in delivery
•
Built in fuse and on/off switch
•

INSTALLATION

Install the device out of the public area.
Only install the machine on scratch resistant surfaces.
This device is constructed for a standing installation only.

Connection with the mains

Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
Cable Pin
Brown Live
Blue Neutral
Yellow/Green Earth
installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
International
The earth has to be connected!
L
If the device will be directly connected with the local power supply
N
network, a disconnection switch with a minimum opening of 3 mm
at every pole has to be included in the permanent electrical
14/18 00092593, Version 1.1