Download  Print this page

Makita DMR202 Instruction Manual

Cordless job site speaker
Hide thumbs


Cordless Job Site Speaker
IMPORTANT: Read Before Using



  Related Manuals for Makita DMR202

  Summary of Contents for Makita DMR202

  • Page 1 Cordless Job Site Speaker DMR202 INSTRUCTION MANUAL IMPORTANT: Read Before Using...
  • Page 2 Explanation of general view...
  • Page 4 extended period. To avoid hearing damage, use the ENGLISH (Original instructions) product at moderate volume level. Symbols 16. (For products with LCD display only) LCD displays include liquid which may cause irritation and The following show the symbols used for the equipment. poisoning.
  • Page 5 • Replace only with the same or equivalent type. • Only use genuine Makita batteries. Use of non- genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger.
  • Page 6 Power The speaker can be powered by Makita battery packs or a standard wall outlet. Power by battery When “LOW BATTERY” is shown on the display, please replace the battery. The following table indicates the operating time on a single charge.
  • Page 7 • Use the AC power adaptor supplied with the product or specified by Makita only. • 14.4V/18V batteries • Do not hold the power supply cable and plug by your mouth. Doing so might cause an electric shock.
  • Page 8 Disconnecting your Bluetooth device 3. If ‘DMR202’ shows in your Bluetooth device list but your device cannot connect with it, please delete the Press and hold the Bluetooth pairing button...
  • Page 9 3. To pause playing, press the Play/Pause button . To Using USB memory devices resume playing, press the Play/Pause button again. Note: Important: a) If you turn off the speaker , the next time the speaker is 1. Your speaker is only designed to work with USB flash turned on, it will resume to the last played track.
  • Page 10 SPECIFICATION Amplifier Output power 10.8V-12Vmax:3W 14.4V:6W 18V:10W Frequency response 50Hz~20kHz Aux In Input sensitivity 250mVrms @100Hz Speaker Main speaker 101.6mm 8ohm 10W Tweeter speaker 36mm 8ohm 10W Bluetooth ® (The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.) Bluetooth version Bluetooth Profiles A2DP...
  • Page 11 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 3A81cB5Z4000A DMR202-ENAU-1804...