Table of Contents
Advertisement
1
Introduction
Scope
The purpose of these instructions is to describe the two-hand device JSTD20 and to provide the necessary
information required for assembly, installation, operations, checks and adjustments after installation, and
maintenance. The instructions also include information necessary to connect JSTD20 to a safety circuit.
Audience
This document is intended for authorized installation personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
•
Basic knowledge of ABB Jokab Safety products.
•
Knowledge of enabling devices.
•
Knowledge of machine safety.
Special notes
Pay attention to the following special notes in the document:
Danger of severe personal injury!
Warning!
An instruction or procedure which, if not carried out correctly, may result in injury to the technician
or other personnel.
Danger of damage to the equipment!
Caution!
An instruction or procedure which, if not carried out correctly, may damage the equipment.
NB:
Notes are used to provide important or explanatory information.
2TLC172259M0201 rev. A
2013-09-13
Obsolete product!
Please see JSTD25 for replacement.
4
www.abb.com/jokabsafety
Advertisement
Table of Contents
