Mitsubishi FR-S520-*K Series Manual page 2

Quick Setting
using Setting Dial
The frequency and parameters etc. can be set
with a few simple steps.
Easily set values: turn quickly to greatly
change the value, and turn slowly to finely ad-
just the value.
Accurate settings can be made with the new
notch-type "clicking" feel.
The setting dial is
your new tool for operations
See how easy it is to make simple operation settings.
1
PUSH
2
Simple Operation
As the default, the parameters that can be set have
been grouped into the minimum required twelve para-
meters. Thus, parameters can be managed easily.
The modes can be changed between the PU and exter-
nal operation modes just by pressing the PU/EXT (op-
eration mode changeover) key. The current operation
mode can be confirmed with the status display LED.
The set frequency and the output current value can be
monitored just by using the setting dial (set frequency
monitor) or SET key (output current value monitor).
(When in the monitor display state.)
Example of PU operation mode
!!