Download Print this page

Procon MSZ100 Owner's Manual page 7

Stolen vehicle recovery unit.

Advertisement

Mounting the Antenna
1.
Locate area to mount dual-purpose antenna in the front underside of vehicle
dashboard, or beneath rear deck below windshield. Antenna placement should have
visibility of the sky.
Antenna should be mounted in a horizontal position, with side that contains four
cutouts facing towards the sky.
Fixed antenna position must maintain a distance of at least eight inches from driver
and/or vehicle passengers.
Antenna will receive signal through plastic, glass, cloth, or fiberglass, but NOT metal.
Do not mount the antenna near radio, vehicle computer, or vehicle speakers.
2.
Route antenna cables to selected mountain location with caution, keeping cables away
from any moving parts or anything that may produce extreme heat. Loosely coil and tie
excess cable with tie-wrap.
Secure antenna's fixed location position with tie-wraps and/or two-sided tape.
3.
Hand tighten appropriate antenna cables into CELL and GPS labels on main unit.
Do not tighten connectors with wrench.
White attached labels on end of antenna cables identify CELL and GPS antenna leads.
Antenna Replacement
If replacing antenna, disconnect unit power before removing the antenna cable.
8
For Customer Service or technical questions call toll-free 1-888-466-5356

Advertisement

loading