2.1.11.3. Formatting SD Card
Use Windows OS computer to format the SD Card prior to use
Figure 7: SD Card Formatting
•
Slide SD Card into SD Card reader
•
Windows will recognize SD Card as removable device and assign a drive letter
•
Right click on drive letter, select Format
•
Select FAT as File System
•
Verify the Quick Format box is unchecked to perform a full format
•
Click Start to format the SD Card
•
When done, make sure to "Safely Remove Hardware" as USB Mass Storage Device prior to
physically removing the SD Card from computer.
Assigned Drive Letter (may vary)
SD Card Memory Capacity
(Included 2GB SD Card)
File system
Volume label
Page | 14