General Safety Advice; Duty Of Taking Care By The User - Kaindl WIG 4 Operating Instructions Manual

1. To grant a protection against electric overflow, the machine must be plugged in a
socket with protective plug reception.
2. By using an electric extension cable, take care that the lead cables have minimum
1,5 mm 2 cross-section.
3. We recommend FI protections for the main circuit connection!
4. The protective contact of the plug and coupling must be connected.
5. The specification shown on the type plate of the machine must match with the data
of the local power supply main.
6. Check the machine for damages.
7. Vacuum the grinding dust! This is especially recommended by permanent use.
By using a industrial vacuum cleaner pay attention to the filter class. only use filters
having class "M".
8. ATTENTION! Before removing or opening the machine, disconnect the main
plug!
6.

DUTY OF TAKING CARE BY THE USER

The Kaindl electrode grinding machine has been designed and constructed unter
consideration of an endangering analysis and careful selection of observed harmonized
normes, as well as further technical specifications.
This safety can only be achieved in daily work, when all necessary steps are taken. It is the
duty of taking care by the user to plan and control these steps.
The user has to take care that:
• the machine is used as directed (see chapter description)
• the machine is used flawless workable condition, especially that the safety
installations are checked.
• the operation manual is always in a readable condition, complete and available near
the machine.
• all safety and warning stickers placed on the machine are in a readable condition
and hat not been removed.
5.

GENERAL SAFETY ADVICE

6