Specifications And Components; Technical Specifications - Ecosoft ROBUST 1000 Installation And Operation Manuallines

INSTALLATION AND OPERATION GUIDELINES FOR REVERSE OSMOSIS SYSTEMS
ECOSOFT ROBUST 1000, ROBUST 1500, ROBUST PRO, ROBUST 3000

2. SPECIFICATIONS AND COMPONENTS

2.1 TECHNICAL SPECIFICATIONS

Parameter
Purified water flow rate
Feed water flow rate, L/h
Concentrate flow rate, L/h
Inlet water pressure, bar
Operating pressure, bar
Feed water temperature, °С
Ambient air temperature, °С
Connection to water mains
Overall dimensions,
H × W × D, mm
Weight, kg, max.
Electrical rating
Power consumption, W, max.
Ingress protection rating
At feed water TDS of 1000 ppm and temperature of feed water of 25 °С, ±10%.
1
If pressure of water in your system does not meet requirement, install a pressure booster pump to raise it. If
2
water pressure exceeds the upper limit, install a pressure regulator before the RObust.
Using the RObust with feed water temperature between +20 and +30 °С produces a lower rejection rate and
3
higher flow rate, which yields higher TDS of purified water. Using the system with feed water above +30 °С is
advised against.
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2017
RObust 1000
, L/h 55–60
1
110–125
55–65
420x425x220
6
80
Value
RObust 1500 RObust Pro
70–75 70–75
140–150 140–150
70–75 70–75
2,0–5,0
2
5,0–7,0
+4...+30
3
+5...+40
3
"
½
420х410х305 420х410х305
9
230 V, 50 Hz
80
IP 54
RObust 3000
145–150
290–310
145–160
445x480x380
10 25
80 250
7