To Take Up Media Manually - Roland TU2-64 User Manual

Press BASE POINT key (

Be sure to press
base point left unset causes the media to be taken up with excessive force and results in a motor error.
This completes loading of the media.

To Take Up Media Manually

).
and set the base point (the output-start location). Attempting to start printing with the
Take-up with inward
curl
Take-up with outward
curl
You can take up media by using the MANUAL
switch.
However, never operate the MANUAL switch
while the loading lever is engaged (lowered).
Doing so may cause the media to be pulled with
excessive force, actuating the protective feature
and resulting in an error.
4. Operation
29