3. Assembling and Installing
Read This First
Before attempting the operations described here, first install the printer you're using at the target loca-
tion.
Carry out the operations in a location that is flat, level, and stable.
We recommend carrying out the operations at a location near to where the printer you're using is
installed.
Assembling and Installing
CAUTION
1.
Assemble the take-up unit.
Attach the frame and control box to the support bar.
Hex wrench
(large)
Attach the arm to the rail slider and secure in place with the arm retaining screw.
Arm
14
Unpacking and installation must be carried out by two or more persons.
Otherwise the machine or the stand may fall, resulting in injury.
Control box
4 pcs.
Large bolt
Wide
Arm retaining screw
Support bar
Narrow
Large bolts
Rail slider
Orient this side toward the rear.
Frame
4 pcs.