Description Of The Controls; Upper Panel - Smeg Dishwasher ST143 Instruction Manual

3. Description of the controls

3.1
All the dishwasher controls are grouped on the upper panel.
SETTING THE WASHING PROGRAM AND SWITCHING ON
To select the most suitable program for the dishes to be washed refer to the table below, which
indicates the most appropriate program according to dish type and degree of soiling.
After using the table to identify the most appropriate washing program:
•
•
•
30
User instructions

Upper panel

ON/OFF button
1
Pressing this button energises the appliance.
SELECTED PROGRAM indicator lights
2 Illumination of this light denotes the program selected and the occurrence of a fault
(troubleshooting).
PROGRAM SELECTION button
3
By pressing this button in sequence it is possible to select the desired program.
SALT WARNING LIGHT (certain models only)
4
Illumination of this light signals that salt container is empty.
RINSE AID WARNING LIGHT (certain models only)
5
Illumination of this light signals that rinse aid dispenser is empty.
HALF LOAD BUTTON (certain models only)
6
Pressing this button selects the HALF-LOAD function.
HALF LOAD INDICATOR LIGHT
7
Illumination of the light indicates selection of the HALF-LOAD function.
press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;
keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to
the desired program illuminates;
close the door; the machine will automatically begin the washing program after the sounding of
the acoustic device.