Table of Contents
Advertisement
General Instruction
Bluetooth connectivity
Turn ON the Speaker. In your mobile, Scan for nearby Bluetooth device named
ZEB-AXON. Tap on ZEB-AXON, to connect.
USB/mSD card Mode.
Insert the USB/mSD to their respective slots. The speaker will dectet the USB/mSD on
itself & the songs from the USB/mSD will be played.
FM Radio
Switch the Speaker to FM, In FM Mode, Press the Play/Pause Key to scan the
available FM channels. Once the scanning is done, The Speaker will start playing the
first scanned channel.
AUX-In
The Speaker can be connected to an audio device using a 3.5mm Cable.
Connect the one end of the Cable to ZEB-AXON & Connect the other end of
the cable to a audio source. The songs from the audio source can be heard
through the speaker.
Charging instruction:
Connect micro USB cable to the speaker & connect the other end of the cable to a 5V
DC adapter.
Note:
Charging Indication: Red LED Glows
Full Charging Indication: Red LED turns OFF
Advertisement
Table of Contents
Need help?
Do you have a question about the ZEB-AXON and is the answer not in the manual?