Telrad CPE8100 System Manual page 5

PLEASE READ THESE SAFETY PRECAUTIONS!
RF Energy Health Hazard
The radio equipment described in this guide uses radio frequency transmitters. Although the power
level is low, the concentrated energy from a directional antenna may pose a health hazard.
Do not allow people to come in close proximity to the front of the antenna while the transmitter is operating.
Protection from Lightning
Before connecting this instrument to the power line, make sure that the voltage of the power
source matches the requirements of the instrument. The unit must be standards.
Disposal and Recycling Information
Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with
unsorted waste. Please contact your local recycling authority for disposal of this product.
Reduction of Hazardous Substances
This CPE is compliant with the EU Registration, Evaluation, Authorization and Restriction of
Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliamentand of the
Council) and the EU Restriction of Hazardous Substances (RoHS) Directive (Directive 2002/95/EC of the
European Parliament and of the Council).
CE Conformance Declaration
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of
the European Union (1999/5/EC). This equipment can meet the following conformance standards:
• EN 60950/22 - Product Safety
• EN301489 EN301908 EN62311 - EMC requirements for radio equipment
This device is intended for use in all European Community countries.
FCC USA CBRS Band Category B device
The CPE8100 requires installation by a CPI (Certified Professional Installer) as defined in Section 96.39 and 96.45 of FCC
part 96 requirements. The Compact is Classified as a Category B CBSD which requires the following info be recorded and
uploaded as part of the CPI process per section 96.45
Page 5