Nd&S Configuration; Plmn Selection - Telrad CPE8100 System Manual

 ND&S Configuration
The LTE radio can be enabled or disabled via 4G Radio setting. The radio can also be reset
via Reconnect.
The CPE support both Mobile and Nomadic network selection mode. The Mobile mode will
automatically scan the network and attach soon as the system has completed the startup
procedure. The Nomadic mode allows user to configure up to 32 fixed channel and perform
PLMN & cell selection based on certain criteria as specified in "Cell Selection" tab.
Note: After configure any parameters of the device, you must click the "Save & Apply"
button to save the configuration. Otherwise the configuration will not take effect.
 PLMN Selection
If the network mode is configured to be Nomadic in the ND&S menu, then you can add and
configure the PLMN list to restrict the CPE to attach. The CPE will attach to network
according to the PLMN priority assigned.
Page 23