Table of Contents
Advertisement
6
2
-
- OPERATING ELEMENTS AND CONNECTIONS
2.1 - Front Panels
1
2
3
4
5 6 7
1. TRIM CONTROLS These controls allow accept variable input level. They have 44dB adjustable range
as - 60dB to -16dB for microphone level and -30dB to +14dB for line level.
2. SIGNAL INDICATORS These indicators show present input signal on the each input channels.
3. PEAK INDICATORS These indicators warn against clipping shortly on the each input channel.
M&L recommend for users to adjust TRIM control when PEAK indicator is flickering to make best
performance.
4. INPUT CHANNEL FADER These faders allow level adjust for each input channel.
5. INPUT CHANNEL EQ CONTROLS 6 MIC input channels have 3 bands equalizer which is adjustable
over a wide range.
6. OUTPUT CHANNEL SELECTORS These selectors allow each input signal through out to selected
output channel. This function is in MZX1002 only.
7. PFL SWITCHES This switch allows you to monitor the pre-fader signal of input channel through
headphone output.
8. OUTPUT CHANNEL EQ CONTROLS Output channels have 2 bands equalizer which is adjustable over
a wide range.
9. SUB OUTPUT LEVEL CONTROLS These controls allow level adjust for sub output channels.
10. OUTPUT CHANNEL FADER These faders allow level adjust for main output channels.
11. CLIP INDICATORS These indicators warn against clipping shortly on the each output channel. M&L
recommend for users to adjust output fader when CLIP indicator is flickering to make best performance.
12. OUTPUT LEVEL METERS These indicators show output signal level.
13. AFL SWITCHES This switch allows you to monitor the main output signal of output channel through
headphone output.
14. HEADPHONE LEVEL CONTROL This control allows you adjust the signal level of headphone output
15. HEADPHONE JACK TERMINAL M&L recommend for users to use a standard 6.3mm (1/4") jack for
connection of headphones. Pig.3 shows proper headphone plug for standard 6.3mm (1/4") jack.
(1/4" Phone 3 Section Connector)
16. POWER INDICATOR This indicator shows power on/off status.
17. POWER SWITCH Device will be supplied power when this switch is pressed and locked.
MZX1002
( O )
(1/4" Phone 2 Section Connector)
8
9 10
( X )
12
11
8
12
11
13
16
MZX1002
MIXER ZONE
9 10
15 14 17
Fig.2
Advertisement
Table of Contents
