Wolf VS24 Use And Care Manual page 8

VA CU UM S E A L D R AW E R O P E R AT I O N
Operation
AU X ILI A RY AT TA CH ME N T
The auxiliary attachment provided can be used to vacuum
seal wine bottles and other rigid containers.
To Vacuum Seal Rigid Containers:
Place the unit adapter and wine bottle adapter onto
1
opposite ends of the vacuum hose.
Place the unit adapter over the vacuum inlet in the
2
vacuum chamber. Refer to the illustration below.
Place a bottle stopper in the wine bottle.
3
Place the bottle adapter over the stopper.
4
Press AUX VAC multiple times to select the desired
5
vacuum level. Use level 1 for all bottles and rigid con-
tainers unless otherwise specified for the container.
Press START to initiate the vacuum cycle.
6
An audible signal indicates the process is complete.
7
NOTE: When AUX VAC is pressed, the lights indicating the
VACUUM and SEAL level will turn off. To resume normal
operation, select a VACUUM setting.
VACUUM
INLET
Auxiliary attachment
|
8 Wolf Customer Care 800.222.7820
PU MP D EH U M ID IF IC ATIO N C Y C LE
Moisture can build up in the vacuum pump oil, which could
damage the unit. Run a pump dehumidification cycle when
appears on the display.
To Remove Moisture from the Vacuum Pump:
Press .
1
The pump cycles for approximately 10 minutes.
2
Once complete, the unit turns off.
3
Allow the unit to cool for 1 hour before starting another
4
cycle.