Portable Wi-Fi Hotspot - Kyocera Rise User Manual

Portable Wi-Fi Hotspot

Portable Wi-Fi Hotspot allows you to turn your phone into a Wi-Fi hotspot.
Set Up Portable Wi-Fi Hotspot
1. Press Home
2. Touch Portable Wi-Fi hotspot and place a check mark in the adjacent field to activate
the service.
 Using both data service and hotspot drains your phone's battery at a much faster
rate than when using any other feature combination.
Note: The best way to keep using the phone as a hotspot is to have it connected to a power
supply.
Important: Write down the passkey (password) for this WEP/WPA/WPA2 PSK
communication (shown onscreen).
Connect to Portable Wi-Fi Hotspot
1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select your phone hotspot from the
network list.

Your phone name can be changed by pressing Home
Portable Wi-Fi hotspot > Network SSID.
3. Select this device and follow your onscreen instructions to enter the passkey (provided
on the Portable Wi-Fi hotspot page).
4. Launch your Web browser to confirm you have an Internet connection.
Configure Sprint Mobile Hotspot
1. Press Home
2. Set the following options:

Network SSID: Sets your network name.

Security: Sets the security level.

Password: Sets a password if necessary.

Maximum Wi-Fi clients: Sets the maximum Wi-Fi clients that can connect to your
phone.
Web and Data
and touch > Portable Wi-Fi hotspot > OK.
and touch > Portable Wi-Fi hotspot.
128
and touching >