Configuring The Barcode Reader - Mio MioCARE+ A105 Series User Manual

en

Configuring the barcode reader

From the desktop, do one of the following to access the Barcode reader configuration utility:
• Tap the All Applications button (
• Tap
By using the configuration utility, you can:
• Tap the CONFIG tab and then enable/disable the barcode reader of the device by selecting/
clearing the Enable option.
• Tap the CONFIG tab and then set up the barcode reader functions, including: Key Message,
Read Mode, and Read Time.
• Tap the SETTINGS tab and then choose the supported barcode type.
Managing the available memory
You can check and manage the device memory, including the external and internal memory.
If you want to...
Check the memory status,
Remove applications,
Stop running services,
Erase the device contents,
10
from the Quick Launcher.
Then...
1. From the Settings menu, tap Storage.
2. Check the memory status from the following section: INTERNAL
STORAGE, SD CARD, and USB STORAGE.
1. From the Settings menu, tap Apps.
2. Tap the DOWNLOADED or ON SD CARD tab.
3. Select the application you want to remove and then tap Uninstall.
1. From the Settings menu, tap Apps.
2. Tap the RUNNING tab.
3. Select the process item you want to stop. Read the warning
message and then tap Stop.
1. From the Settings menu, tap Backup & reset > Factory data reset.
2. Read the warning message and then tap Reset device.
3. Tap Erase Everything.
) > Barcode Reader Config.