Mio MioCARE+ A105 Series User Manual page 10

4. When your device is connected to a wireless network, the WLAN icon (
the Status Bar indicating the signal strength (number of bands that light up).
The next time your device connects to a previously accessed secured wireless network, you will
not be prompted to enter the WEP key again, unless you reset your device to its factory default
settings.
• Bluetooth
Bluetooth on your device operates in three different modes:
• Off: (default) Bluetooth is turned off. You cannot send/receive data using Bluetooth.
• Discoverable: Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your
device.
Tip: From the Settings menu, tap Bluetooth > Menu button (
the discoverability timeout.
• On: Bluetooth is turned on, and the device will be able to detect the other Bluetooth-enabled
devices, but not vice versa.
To turn Bluetooth on, tap the Bluetooth OFF/ON button from the Settings menu. When
Bluetooth is turned on, the Bluetooth icon (
To pair the Bluetooth devices:
1. When Bluetooth is enabled, the device will automatically scan for available Bluetooth devices.
Tap the Bluetooth item to display the list of in-range Bluetooth devices.
Tip: Tapping SEARCH FOR DEVICES allows you to scan the in-range Bluetooth devices again.
2. Tap a device from the list to initiate pairing.
3. When prompted, enter the PIN code and then tap OK.
4. On the other device, enter your device's PIN code to accept the pairing.
5. Once the pairing is completed, you can now start sharing data between the devices.
) > Visibility timeout to set
) appears in the Status Bar.
en
) will appear in
9