Table of Contents
Advertisement
4.3. Command Set
4.3.1. Command List for Local Device
Item
Syntax
1.
Connecting
AAddr<Enter>
address
2. Baud rate
BBaud Rate
3. COM port
CCOM Port
4. PIN code
EPIN<Enter>
5. Flow control
FFlow Control
6.
Connection
Mmode
mode
7. Friendly name
Nname<Enter> Set a friendly name up to 11
8. Command for
O
the remote
9. Parity Bit
Pparity
10. Stop Bit
Sstop
11. View
V
12. Exit
X
13. Usage
?
Waning!
If you push the RST button, the COM port of HPS-120 will be stored the factory setting.
Description
Set
a
remote
address
for
a
wireless
connection.
Change the baud rate
This is only valid in connection
mode 2.
Authentication Off: Type <Enter>
Authentication On: Type up to 11
characters
Set the Flow control.
Set a connection mode
characters.
Enter configuration mode
for the remote.
Set the parity bit.
Set the stop bit.
Display
configuration
information
Apply changes.
Print the usage.
Remarks
device
A
local
BD_ADDR always need to
be difference.
Baud Rate - 0: 1200, 1:
2400, 2: 4800, 3: 9600, 4:
19200, 5: 38400, 6: 57600,
7: 115200
Paired
adapters
have a same PIN code.
0: None, 1: Hardware, 2:
DTR/DSR, 3: Hardware &
DTR/DSR
0: 1:1 Mode, 1: WAIT Mode,
2:
REGISTER
CONNECT Mode
0: None, 1: Odd 2: Even
0: 1 Stop, 1: 2 Stop
and
remote
should
and
9
Advertisement
Table of Contents
