Hardware Installation; Hardware Description; Power Supply; Install Procedure - HandyWave HPS-120 User Manual

3.1. Hardware Description

RST Button
RS-232
Connector
OPR LED
LNK LED

3.2. Power Supply

You can supply power to the HPS-120 as follows:
Use an AC/DC converter (Output Power: +5 ~ +12Vdc / 300mA).
Use a provided USB cable.
You can supply power via 9

3.3. Install Procedure

Step 1: Assemble a provided antenna to HPS-120 body.
Step 2: Plug a HPS-120 into the COM port of device.
Step 3: Power on.
Step 4: Configure the HPS-120, if necessary.
Screw
DC In Jack
th
pin of D_SUB 9 Pin connector.

3. Hardware Installation

USB Cable
for Power
Antenna /
Connector
7