Panasonic WV-Q169A Operating Instructions Manual page 12

<Installing WV-SFV631L, WV-SFV611L>
Mount the attachment plate (supplied with
q
the camera) to this mounting chassis. Use 4
M4-L8 screws (supplied with the camera)
to secure the attachment plate firmly as
shown in the drawing.
(Recommended tightening torque:
0.78N·m {0.58 lbf·ft})
Connect the camera cables.
w
12
Mounting chassis
Attachment plate
(supplied with
the camera)
M4-L8 x4
(supplied with the camera)
Align the "OPEN" mark of the camera with
e
the protrusion of the attachment plate .
Mount the camera by inserting the attach-
ment mounting screws into the holes of the
attachment plate.
Rotate the camera in the arrow direction
so that the protrusion of the attachment
plate is aligned with the "LOCK" position to
eliminate any backlash between the cam-
era and attachment plate.
Protrusion of
attachment plate
Approx. 15 °