Download
Share
Print this page
Panasonic WV-Q110E Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Racks & Stands
  5. WV-Q110E
  6. Instructions manual
Panasonic WV-Q110E Instructions Manual

Panasonic WV-Q110E Instructions Manual

Wall mount bracket
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Before attempting to connect or install this product,
please read these instructions carefully and save this manual for future use.
Caution
• Installations for this product should be performed by qualified service personnel or system installers.
• Consult an expert about the resistible load weight of the installation surface and structure. Insufficient strength may
cause falling of the camera. Refer to the specifications of the products for weight.
Introduction
This bracket is used for mounting the colour camera WV-CW860 or WV-CW864 onto a wall.
There are two ways of cable exit available from the front or rear of the bracket.
The camera in the illustration is separately sold.
Wall Mount Bracket
WV-Q110E
Model No.

Advertisement

loading

Related Manuals for Panasonic WV-Q110E

Summary of Contents for Panasonic WV-Q110E

  • Page 1 Wall Mount Bracket WV-Q110E Model No. Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use. Caution • Installations for this product should be performed by qualified service personnel or system installers.
  • Page 2 Front Cable Exit 1. Preparations Specify the bracket fixing location, and then put in Mark hole positions four anchor bolts, or drill four bolt holes on the installation surface. Refer to Dimensions on page 6. 2. Cable Bushing Fit the supplied cable bushing into the front cable exit of the bracket.
  • Page 3 6. Setting Switches Refer to Setting the Switches in the manual includ- ed with the camera. 7. Cable Connection Refer to CONNECTIONS in the manual included with the camera. Camera Fixing Screw 8. Mounting Upper Base Upper Base Fix the upper base to the bracket using four screws. Cables Sealant 9.
  • Page 4 Rear Cable Exit Mark hole positions 1. Preparations Specify the bracket fixing location, and then put in four anchor bolts (not supplied), or drill four bolt holes on the surface. Cable Access Hole Remember that a cable access hole is necessary on on the wall the wall in this case.
  • Page 5 6. Disassembly of Camera (1) Remove the upper base from the camera by loosening three screws, and then turn the upper Upper Base base to separate it. (2) Remove the attachment pipe from the upper base by loosening four screws. Attachment Pipe Camera 7.
  • Page 6 Dimensions (269) Ø58 Fall Prevention Wire Hook Camera Fixing Screw Hole x4 4-Ø10 Ø25.4 Front Cable Exit Rear Cable Exit (111.5) (Punch out the hole when using) Unit: mm...

  • Page 7: Specifications

    Specifications Dimensions: 111.5(W) x 210.5(H) x 269(D) mm Weight: 2 kg approx. Weight and dimensions indicated are approximate. Specifications are subject to change without notice. Accessories Camera Fixing Screw .........4 pcs Cable Bushing..........1 pc Blank Bushing ..........1 pc...
  • Page 8 Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ NM0102-0 V8QA5987AN Printed in Japan 2002 © Matsushita Communication Industrial Co., Ltd. All rights reserved N 19...