Cardiovascular Systems, Inc. DIAMONDBACK 360 Peripheral Orbital Atherectomy System Exchangeable Series Instructions For Use Manual page 24

Figure 8. Assembled OAD.
11.5. Connecting the OAD to the OAS Pump
Remove the sterile saline tubing from the OAD package and pass the saline bag spike
end of the saline tubing out of the sterile field. Connect the other end of the saline tubing
luer to the device luer. Additionally, pass the OAD power cord out of the sterile field.
Perform the following:
1. Connect the saline tubing to the saline bag with lubricant using standard institution
procedures.
2. Open the door, located on the front of the OAS pump, by rotating the door in the
direction of the arrow (Figure 9).
3. Place the saline tubing over the pump rollers so that the tubing positioners align with
the top and bottom V-guides on the pump (Figure 9).
19